Product ID:HARD LEAD, ANTIMONIAL OR ARSENICAL ALLOY
MSDS Date:01/01/1987
FSC:3433
NIIN:00F006733
MSDS Number: BBWJT

PEERLESS ALLOY, INC/DENVER, CO 80204

Emergency Phone: (303) 825-6394

Cage: 06693

PEERLESS ALLOY, INC/DENVER, CO 80204

Cage: 06693

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 99%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 25%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ARSENIC (SARA III)

CAS: 7440-38-2

RTECS: CG0525000

Fraction By Weight: 5%

OSHA PEL 0.5 MG/M3 (AS)

ACGIH TLV: 0.01,A1 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

Effects of Overexposure:SLIGHT IRRITITATION TO SKIN/EYES, ANEMIA,
CONSTIPATION, HEADACHE, PARALYSIS, PNEUMOCONIOSIS.

First Aid:INHALATION: REMOVE FROM EXPOSURE. GET MED ATT IF EXPERIENCING
EFFECTS OF OVEREXPOSURE. INGESTION: GET MEDICAL ATTENTION. EYES:
FLUSH WITH LARGE QUANTITIES OF WATER. GET MEDICAL ATTENTION. SKIN:
WASH T HOROUGHLY WITH SOAP & WATER.

Extinguishing Media:DRY CHEMICAL OR CO2 SHOULD BE USED ON SURROUNDING
FIRE.
Fire Fighting Procedures:USE APPROVED FULL-FACEPIECE, SCBA/FULL
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUME, DUST, OR MIST
THAT MAY BE TOXIC/RESPIRATORY IRRITANTS.

Spill Release Procedures:DUST OR PARTICULATE SHOULD BE VACUUMED, OR WET
SWEPT WHERE VACUUMING IS INFEASIBLE. ACE MATERIAL IN DRY, CLOSED
CONTAINERS FOR DISPOSAL OR RECYCLING. DO NOTSE COMPRESSED AIR OR
DRY SWEEPING FOR CLEANI NG.

Handling and Storage Precautions:STORE IN A DRY AREA WHERE ACCIDENTAL
CONTACT W/ITH ACIDS, BASES, HYDROGEN PEROXIDE, OR HALOGENASES IS
NOT POSSIBLE.
Other Precautions:EATING/SMOKING SHOULD BE CONFINED TO NON-CONTAMINATED
AREAS. DO NOT USE COMPRESSED AIR FOR BLOWING DUST OFF OF CLOTHES.
WASHANDS, FACE, NECK, ARMS THOROUGHLY BEFORE EATING OR SMOKING.

Respiratory Protection:USE APPROVED RESPIRATORS IS REQUIRED
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:SHOULD BE WORN
Eye Protection:FACESHIELD/GOGGLES/GLASSE
Other Protective Equipment:FULL PROTECTIVE CLOTHING/SAFETY SHOES/OTHER
EQUIPMENT.
Supplemental Safety and Health
MSDS DATE: 9/27/85. MELTING POINT: 486-680F.

Spec Gravity:11.3
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL, ODORLESS.

Stability Indicator/Materials to Avoid:YES
HALOGEN GASES, OXIDIZERS OR ACIDS, OR HYDROGEN PEROXIDE.
Stability Condition to Avoid:REDUCING CONDITIONS/HYDROGEN MAY EVOLVE
STIBINE/ARSINE GAS.
Hazardous Decomposition Products:HEAVY METAL DUST AND/OR FUMES.

Waste Disposal Methods:MATERIAL SHOULD BE RECYLCED IF AT ALL POSSIBLE.
COLLECTION, TRANSPORTATION, AND STORAGE SHOULD BE IN ACCORDANCE
WITH FEDERAL STATE, AND LOCAL LAWS. USE APPROVED RESPIRATORY
PROTECTION IF DUST/FUME EXP OSURE POSSIBILITY EXISTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.